Configuration Software

Our new software enables easy configuration of our Prisma TFT controller boards according to your requirements. Two versions are available:

The software enables configuring the following board features:

LVDS timing (with spread spectrum for increased EMI performance)
Power Sequencing (T-CON, BLU, PSU remote signal on screw terminal)
T-CON supply voltage is configurable for 3.3V / 5.0V or 12V
Backlight unit (BLU) control (ANA/PWM, 3.3V/5V min/max, with pixel dimming)
Adjustable LVDS option pins (e.g. for reverse scan, JEIDA/VESA mapping, H/L, 3.3V or 5V level)
Configuration can be saved as XML file for future use
OSD setup and user data can be saved and re-used
Firmware and EDID can be updated easily
operation hour counter
(analyzable separately for display and backlight)
the user can chose the active input interfaces
(for shorter switching periods when searching for an input source)

Panel Configuration
- LVDS channel swap
Board Configuration
- „Enable SOG (Sync On Green) on VGA port“
- 4-/6-Button Keypad selection
- 2 custom modes for special timings can be defined

You are here